Contact Customer Service if you need information on a test not listed below.

California Technical Bulletin, 117: Pass
IMO A.652 (16) 8.2 : Pass
IMO A.652 (16) 8.3: Pass
NFPA 260 : Pass
UFAC Class 1 : Pass
Anti-Bacterial AATCC 147-1998: Pass
Colorfastness to chlorine bleach: 1:10
Colorfastness to Light AATCC 16-40 hrs.: 200 hours
Crocking AATCC-8: 20 cycles- Excellent
Hydrolysis: 5 weeks - no delamination
Abrasion ASTM D 41 57-10: 100,000
Seam Strength ASTM D751-98: 60lbs./in x 60lbs./in min

General Maintenance:
W-S For Oridnary dirt and common stains use a soft cloth with mild soap and water or a mild household detergent.

Rinse the surface with clear water after cleaning.

For difficult stains, such as ballpoint pen, wipe with a clean dry cloth or towel until the stain is removed. If the stain persists, apply isopropyl alcohol and wipe clean.

Wash area off with clean warm water to remove any residue

Disinfection
A 5:1 water/bleach solution may be used as a disinfectant. Rinse the surface with clean water after disinfecting.

Dry stains such as permanent marker and ballpoint pen can be erased with a clean cloth. With stains like food (e.g., ketchup and mustard) or topical stains (e.g., lotions and creams) that would ruin conventional urethane upholstery will wipe clean.

Remove ordinary dirt and smudges with mild soap and water. A 5:1 ratio of water to bleach solution may be used as a disenfectant. Rinse the surface with clean water after disinfecting. Dry with a soft, lint-free cloth or towel. The use of conditioners or protectants is not required, nor recommended, for use on this upholstery- it's cleanability is permanent and won't wear out.

Stubborn stains:If a ghost stain remains, apply a small amount of household rubbing alchohol ( isopropyl-91%) to a clean, lint-free cloth and rub the stain until it has been removed. Rince with a clean, damp cloth and go!