Wyzenbeek and Martindale are both abrasion rub tests for textiles. Learn the difference between the two and what factors are most important.Read more
Content: 100% Phthalate Free Vinyl
Width: 54 Inches
Weight: 36 oz per linear yard
Suggested Use: Upholstery
Application suitability is the sole responsibility of the designer/purchaser.
Contact Customer Service if you need information on a test not listed below.
ASTM E-84 Adhered: Class 1 or A : Pass
BIFMA Class A- CS-191-53, Section 3: Pass
California Technical Bulletin, 117: Pass
IMO A.652 (16) 8.2 : Pass
IMO A.652 (16) 8.3: Pass
MVSS 302 : Pass
NFPA 260 : Pass
UFAC Class 1 : Pass
Cold Crack CFFA-6 Federal Standard: +10 F
Crocking AATCC-8: Dry: 4.5 / Wet: 5
UV Resistant ASTM G154-o6: Pass
Abrasion ASTM D 41 57-10: 100,000
W-Mild soap and water.
Prompt cleaning is always recommended. Mild soap and water, then rinse with fresh water and wipe dry with a clean cloth. Wipe affected area with a soft cloth or soft bristle brush using a non-abrasive cleaner, for example Formula 409or Fantastik. Rinse with fresh water and wipe dry. 10% solution of household bleach and water. Rinse with fresh water and wipe dry. 25% solution of alcohol and water. Rinse with fresh water and wipe dry. 25% solution of lighter fluid or nail polish remover and water. Rinse with fresh water and wipe dry