The popularity and demand of quality cotton velvet for drapery and upholstery use continues to increase enormously. Here are best practices for using velvet for different applications.Read more
Per Linear Yard
PERFORMANCE - A product that takes its quality cues from full grain leather while taking its color choices from the evolving way we choose to see leather – from warm neutrals to intelligent colors.
From mascara to mustard, lipstick to lotion, blood to ball point pen, soy sauce to soda. Not enough? Try urine, motor oil, iodine. Hairspray, butter, whiskey, salad dressing, coffee, tea, mayonnaise and liquid foundation. Each aggressively tested to great success.
PERFORMANCE will resist, without serious discoloration, the repeated actions of normal dilutions of non-abrasive chlorine or ammonia-based cleaners.
Anti-bacterial. Anti-microbial. Supple. Soft. UV resistant. Extremely high F/R standards. Mildew resistant. One half of one million double rubs Wyzenbeek.
- 100 % Poly Vinyl
- 500,000 Double rubs
* Samples are available to the trade only.
Most memo samples are 9” x 9”. Cuttings (when available) are 3” x 3”.
Color rendition varies by computer/device manufacturer and model.
Product samples provide a more accurate representation of color and texture.
Content: 100 % Poly Vinyl
Width: 54 Inches
Weight: 29 oz per linear yard
Suggested Use: Upholstery
Application suitability is the sole responsibility of the designer/purchaser.
Contact Customer Service if you need information on a test not listed below.
ASTM E-84 Adhered: Class 1 or A : Pass
BIFMA Class A- CS-191-53, Section 3: Pass
California Technical Bulletin, 117: Pass
IMO A.652 (16) 8.2 : Pass
IMO A.652 (16) 8.3: Pass
MVSS 302 : Pass
NFPA 260 : Pass
UFAC Class 1 : Pass
Anti-Bacterial AATCC 147-1998: Pass
Anti-Microbial AATCC 147-1998: Pass
Cold Crack CFFA-6 Federal Standard: -20F
Colorfastness to chlorine bleach: 1:10
Colorfastness to Light AATCC 16-40 hrs.: 500 hours ASTM g26-96 Method C/CFFA-2
Crocking AATCC-8: Dry: 5 / Wet: 5
Mildew Resistant ASTM G21-96: Pass
UV Resistant ASTM G154-o6: Pass
Abrasion ASTM D 41 57-10: 500,000
W-S- Mild soap and water; can be cleaned with alcohol based cleaners. Disinfectability: cleans and disinfects with 5:1 water/bleach dilution.
Prompt cleaning is always recommended. Ordinary dirt and stains can be removed with a mild soap and water. For best results follow cleaning steps in order
Care & Cleaning Guide: Performance
Recommended Care and Cleaning Steps
Step 1: Mild soap and water, then rinse with fresh water and wipe dry with a clean cloth.
Step 2: Wipe affected area with a soft cloth or soft bristle brush using a non-abrasive cleaner, for example Formula 409 or Fantastik. Rinse with fresh water and wipe dry.
Step 3: 10% solution of household bleach and water. Rinse with fresh water and wipe dry.
Step 4: 25% solution of alcohol and water. Rinse with fresh water and wipe dry.
Step 5: 25% solution of lighter fluid or nail polish remover and water. Rinse with fresh water and wipe dry.