Contact Customer Service if you need information on a test not listed below.

California Technical Bulletin, 117: Pass
IMO A.652 (16) 8.2 : Pass
IMO A.652 (16) 8.3: Pass
NFPA 260 : Pass
UFAC Class 1 : Pass
Anti-Bacterial AATCC 147-1998: Pass
Colorfastness to chlorine bleach: 1:10
Colorfastness to Light AATCC 16-40 hrs.: 200 hours
Crocking AATCC-8: 20 cycles- Excellent
Hydrolysis: 5 weeks - no delamination
Mildew Resistant ASTM G21-96: Pass
Abrasion ASTM D 41 57-10: 100,000
Seam Strength ASTM D751-98: 60lbs./in x 60lbs./in min

W- For Ordinary dirt and common stains use a soft cloth with mild soap and water or a mild household detergent. Wash area off with clean warm water to remove any residue

Difficult Stains: Non-water soluble stains caused by oils, lotions and certain foodstuffs can be cleaned with 50% solution of Isopropyl Alcohol and water.  Rinse the cleaned area with water after applying with the alcohol solution. Dry with a clean, lint-free cloth.

Disinfecting:  A solution of 5 parts water to 1 part bleach may be used as a disinfectant. Wipe the area with a cloth and clean water, and dry thoroughly with a soft lint-free cloth or towel.

Ordinary dirt, smudges and water-soluble stains such as coffee, tea, juice, soft drinks, milk, beer, and wine can be removed with mild soap and water. Use a clean cloth or soft sponge to gently wipe the stain with soapy water. Don’t stop there – it’s really important to remove any remaining soap solution by wiping the area with a cloth and clean water, and finally to dry the surface with a soft lint-free cloth or towel. Avoid cleaners containing abrasives, as these can damage the product’s coating

Stubborn stains: If a ghost stain remains, apply a small amount of household rubbing alchohol ( isopropyl-91%) to a clean, lint-free cloth and rub the stain until it has been removed. Rince with a clean, damp cloth and go!