Heavy Duty Wyzenbeek
100,000 Double Rubs
Use for Walls, Upholstery
$70.50 Net USD
Shop by Category
- Technology Leather™
- Upholstery & Seating
- Heavy Duty Abrasion
- Under $40
- Velvet & Mohair
- Silk & Natural
- Aviation/Private Jet
Shop by Collection:
Designed for beauty, colored for usability across applications and engineered for maximum strength and comfort, INTREPID reinforces its essential value through its ease of maintenance — even ink can be removed from its surface. INTREPID has been fully profiled and tested on an array of applications, passing numerous stringent industry tests. Suitable for both upholstery and walls, INTREPID performs handsomely as a wisely engineered Technology Leather™.
Content: 100% Nylon
Width: 54 Inches
Weight: 7.4 oz per square yard
Application: Upholstery, Wall Covering
TESTING AND PERFORMANCE
Please call Customer Service if you need information on a test not listed below.
Abrasion: 100,000 Double Rubs Heavy Duty
Cal 117: Complies
Wet and Dry Crocking: Wet - Class 5.0 / Dry - Class 5.0
Breaking Strength: 100 lbs. x 100 lbs (ASTM D-5034-90)
Colorfastness to Light: COLORFASTNESS: Gas Fumes (AATCC-23, 5 cycles) - Class 4-5, little to no color change
Water / Perchloroethylen (AATCC-107-1981) - Class 5, no color change
Fade-O-Meter Test (AATCC-16A-90, 100 hours) - Class 5, no color change
Weather-O-Meter (Xenon Arc, SAE J-1885) - 225 kj/m2, little to no color change
Weather-O-Meter Q.U.V. (ASTM-G-53-91) – 200 total hours, little to no color change
Sulfide Staining (ASTM D-1712-89) - No staining
Seam Slippage: 100 lbs x 80 lbs ASTM D-1683-90A
NFPA 260 / UFAC: Class I
Wallcovering: ASTM E84 Adhered
Urine Resistance: ASTM D543
Ordinary dirt, smudges and water soluble stains, such as coffee, tea, juice, soft drinks, milk, beer, wine etc…can be removed with mild soap and water using a clean cloth or soft sponge to dab the stain with soapy water. Remove the soap solution by wiping the area with a cloth and clean water. Dry with a soft lint free cloth or towel. Please avoid using cleaners containing abrasives or bleach.
APPLICATION SUITABILITY IS THE SOLE RESPONSIBILITY OF THE DESIGNER/PURCHASER
That said, if considering a textile or Technology Leather for other than its stated use, please consider the following:
Does the fabric side-match?
Does the fabric pass, or can it be treated to pass the required FR test?
Is the fabric content suitable for the end usage?
This list is by no means all-inclusive, please check with your Designer/Purchaser.
Please contact us with any questions.